Vimago GT30 

EPICA'S LATEST HDVI PLATFORM

MG-1466.png

Vimago GT30 is a Multi-Modality Masterpiece.

 

It is capable of producing HDVI High Definition Volumetric Imaging (CT), Full-Featured Fluoroscopy & Digital Radiography. 

Greg Stoutenburgh, Co-Founder

Vimago GT30™

Since its inception, Vimago has had the highest spatial resolution and lowest noise of any 3D imaging modality.  Now, with our newest model, Vimago GT30, we have further improved contrast resolution to rival any conventional CT. Vimago GT30 is capable of producing impeccable soft tissue details at 33% increased scanning speed and 33% increased stack size compared to our HU model.

Screen Shot 2020-11-12 at 2.42.55 PM.png

HDVI Platforms

With Vimago™, you can view images in axial, sagittal, and coronal planes - because of this,  Vimago™ studies can be easier to read than regular radio-graphs.
 

  • Proven to be clinically superior to radio-graphs

  • Diagnostically superior or equivalent to conventional CT

  • Study setup in minutes (not including patient positioning & anesthesia time).

  • Replaces Ultrasound in many cases

  • Replaces MRI in many cases

At no incremental cost to the practice...

Screen Shot 2020-11-12 at 4.48.50 PM.png

Fluoroscopy

High-resolution images, auto brightness/contrast & frame rates from 1-30 fps. Interventional imaging quality that exceeds C-Arm systems selling for considerably more. 

 

Any orientation of the patient may be viewed and the gantry can move over the patient during a study with 3-dimensional orientation adjustment.

Latest Platform

Updates Include:

  • Road Mapping

  • Digital Subtraction Angiography

  • Burst Mode

  • Dose Reduction Technology

Digital Xray_Abdomen

Digital Radiography

Vimago's built-in Digital Radiography system can be used in a single shot or scanning mode to allow an entire patient to be scanned in a single radiograph. Images may be taken at any angle.

Myelitis 3D Still.jpg

ANATOMICAL APPLICATIONS

With Vimago™ GT30, you can perform a vast array of applications - beyond any other imaging device. Vimago™ GT30 can easily become your primary imaging modality for:

Castro 3D Myelogram L still.jpg

VIMAGO GT30

Hard Tissue

  • Skulls — sinus, nasal, bulla, ears, brain, oncology, trauma 

  • Orthopedics — stifles, elbows, hips, carpus/ tarsus, angular limb deformities, OCD, cartilage lesions, fractures 

  • Dentistry

  • Spine — cervical, thoracic, lumbar

Image_Esophageal_Cat_Fluoro.png

VIMAGO GT30

Diagnostic Fluoroscopy

  • Coughing

  • Swallow Studies

  • UG Studies

  • Shunts

  • Collapsing Tracheas 

VIMAGO GT30

Soft Tissue

  • Tumors, Foreign Bodies

  • Thorax - Lung, Heart

  • Blood Vessels, Met Checks

  • Abdomen - Liver, Pancreas, Kidneys, Adrenals, GI, Shunts, Oncology

Image_Chest_Fluoro.png

VIMAGO GT30

Interventional Fluoroscopy

  • Biopsies

  • Endoscopy Guidance

  • Stents

  • SUB

VIMAGO GT30

Angiography 

  • Blood Pathways 

  • Lymph vessels

VIMAGO GT30

Surgical 

  • Surgical Planning

  • Guided Biopsies

  • Minimally Invasive Surgeries

SPECIFICATIONS

Quality

HDVI RESOLUTION:

0.1mm - 0.6mm in 3 dimensions with true isotropic voxels

Speed

STUDY SET-UP TIME:

 

~2 Minutes

SCAN SPEED:

 

4-24 Seconds for the first 15cm, + 13-30 Seconds for each additional 15cm

Size

PATIENT SIZES:

Fits any patient from a mouse to a mastiff (up to 50cm in patient thorax and table capacity of 450lbs)

HDVI FIELD OF VIEW:

 

Up to 35cm Radius x 108cm Length

Power

REQUIRES:

 

220V

* Shielding requirements may vary from state to state. Please check your state's regulations to ensure compliance. 

Technical Specifications

X-Ray Generator

Focal Spot: 0,75

Anode: Rotating Anode

Tube Current: 10 - 120 mA

Tube Voltage: 40 - 120 kV (According to exposure table) 

Beam Shape

Max Fov: Image diameter - Standard 175 x 150 mm

Max: 02 x 150 mm

Max image length: 1,050 mm (7 stacks) 

Detector:

Max Binning: 3 x 3

Voxel (min - max): 100 - 600 μm

Patient Centering: 

Lasers 

Scouting modality

Mobile Unit

Yes

Patient Table

Yes

Low Dose Protocol

Yes (optional with FluoroPack)

Dynamic Acquisition:

Fluoroscopy (6 - 30 fps)

2D Acquisition:

Yes

Console Onboard:

Yes

Scan Time:

9 - 18 - 24 - 36 s

Acquisition Rotation:

200°, 360°

Detector Dynamic:

16 bit

Gantry Size:

592 mm

Footprint:

2310 x 1644 x 1485 mm

Weight:

420 kg

Power Input:

220v 32A

EpiCare
Warranty

COMPREHENSIVE SERVICE & SUPPORT

How is Epica's HDVI Technology Different than Conventional CT?

HDVI (High Definition Volumetric Imaging) is a new hybrid technology in CT (Computed Tomography) that provides unprecedented diagnostic and interventional information for clinicians.

Stripe and Spheres

Conventional (CT)

Computed Tomography

Conventional CT samples densities within a patient’s anatomy, providing axial sliced data, leaving gaps in the data in-between each slice. The data is reconstructed using interpolation, which works by using known data to estimate values at unknown points. After the data had been interpolated it is rendered in axial and coronal data sets. The resolution is different on each side

Getting a Haircut

Compared to HDVI Technology

HDVI technology scans a solid volume of data at a time, resulting in gapless data, with no need for interpolation. HDVI delivers a 3D map of densities with spacial resolution that is the same in all three dimensions, with contrast equivalent to conventional CT. 

 

This volume of data can provide resolution as small as 0.09mm which is about the thickness of a human hair. Clinicians can see the data in any angle, thickness or orientation leading to superior diagnostic confidence.

Educational Resources

Scientific Reports | Case Studies | Videos | And More

In our resource center, you will find an abundance of resources on a variety of topics from imaging to marketing support. Take a look now!